Phew, this week is flying by! Today’s project is one of many on a list of home improvement projects that I tend to put off. But I’m so glad I got this one done and I love how it turned out!
Recently, we bought Yuki the popular Ikea Kura bed, which can either be a low or high bed. If you choose the lofted bed, it creates a nice space underneath which can be used as another bed, or you can use the space for something else. Eventually, we imagine we’ll put another mattress underneath for Kaya, like a bunk bed, but until then, we wanted to use the space for some of Yuki’s things like her dresser and books.
So we created a little reading nook for her! And no nook would be complete without some sort of comfy cushion situation. Hideko and I brainstormed a few ideas, but liked the idea of something long and versatile, so I made this folding floor cushion with 4 standard pillows inside.
It’s certainly not an original idea – I remember this post circulating around awhile back. The idea was to sew several pillow cases together as an easy way to create this folding floor pillow. Well, I wanted to make one that was from one continuous piece of fabric, so I made an almost-as-simple tutorial for doing that. Trust me, it’s really easy and your kid will LOOOOVE it. In fact, I love it. It’s the perfect size for me to snuggle up with the girls and a good book or two (or 5 if Yuki is really trying to evade bedtime).
Ok, so here’s what you need . . .
- 2 yards of fabric that is 60″ wide (more about fabric type below)
- coordinating thread
- the sewing essentials, but especially some sort of fabric marking pen or chalk that is removable since we’ll be marking the right side of the fabric.
- 8 buttons (optional)
- 4 standard pillows (try and find really full and fluffy ones, since they flatten quickly with use)
You can really use any type of fabric that you want, but I chose a heavier home dec fabric. I think it helps to keep the shape of the pillows and will withstand plenty of wear. But any fabric will do! And if you don’t have fabric that is 60 inches wide, you can sew two coordinating fabrics together for a fun “reversible” look.
I got this striped fabric at Ikea a couple of years ago and used it as a table cloth for a party. It’s been sitting in my stash since then and every once in awhile Yuki would point to it and say that she really liked it. But since it wasn’t suitable for clothing, I didn’t know what to do with it. This turned out to be the perfect project for it!
Ok, let’s get started! Wash, dry and press your fabric. Fold it in half lengthwise, right sides together (along the gray line in the diagram).
Pin and sew one of the short edges with a 1/2 inch seam allowance. Trim seam allowance to 1/4 inch and finish edges as desired (pinking shears, zig zag stitch or with a serger).
So here’s where I did some of the measuring work for you😉 Standard pillows are 20″ x 26″. Since I wanted my pillows to remain a little fluffed, as opposed to completely flat, I tested out some measurements, but decided on making each pillow sleeve 17″. Since there are 4 pillows, I multiplied 17 by 4 and got a finished length of 68 inches. Measure 68 inches from your first seam and mark with your fabric pen. Pin the two layers of fabric together before sewing to prevent any shifting. After you sew along the line, trim and finish the edges.
The next step is to hem the entire length of the opening. Fold the fabric toward the wrong side by 1/2 an inch and press. Fold again 1.5 inches, press and pin. Do this along the entire length of the opening and then stitch close to the folded edge.
So you now have a suuuper long pillow case. The next step is to top stitch lines to create separate sleeves for the pillows.
Turn your pillow right side out and press. With your fabric pen mark every 17 inches and draw vertical lines.
*HINT – Since you are working with a long piece of fabric, you want to sew closer to the right side and let the fabric hang off the left side of the machine. So measure 17 inches from the right and draw one line, then flip your cover over and repeat. For the center line, you can sew on either side of the cover since the fabric is the same length on either side.
Make sure to pin the two layers of your fabric together before sewing to they don’t slip. Stitch along the lines that you drew and reinforce the stitching at the opening by backstitching several times. Since the opening will receive the most stress, you want to make sure this stitching does not come undone!
And that’s it! You can stop here with the sewing, stuff your pillows and be done!
If you want to add buttons along the edge to fully enclose the pillows, then there are just a few more steps.
Measure and mark where you want your buttonholes to be. Since each opening is 17 inches, I measured 5.5 inches in from each side.
Repeat for all 4 openings and sew your buttonholes. To figure out where to sew on your button, cut your buttonhole open and use your fabric pen to mark the center of your hole on the fabric underneath it. Sew eight buttons on the inside of your cover and you’re done!
Stuff it with pillows and enjoy!
It’s easy to remove the pillows and throw the cover in the wash, or switch out for new pillows if you need. I know this will get so much use for years to come.
We still have a lot of work to do to finish the girls’ room, but we got this nook finished and it really felt like a mini victory! Gotta celebrate those too, right!?
And this. *sigh* These two are adorable together. Yuki insisted that her sister be in the photos with her. Love it!
Now onto the other 387 home improvement projects on my list😛