This post is long overdue! I made this jumper for Yuki for Thanksgiving (along with the Herringbone Short Coat) and I’ve been wanting to share this tutorial ever since. I hope you keep in mind that I just kind of make this stuff up as I go along, so I don’t know if this is actually the best way to make a jumper. It’s just the way that I did it and in case you’re curious – here it is!
I’d been wanting to make a jumper for Yuki for some time. It’s just such a fun and classic style. And there is this super colorful plaid flannel (that I’m kind of obsessed with), that I thought would add a bit of a non-traditional, yet still holiday, feel to this piece. Here is the sketch of the jumper I wanted to make.
For this 12-18 month size jumper I probably used 3/4-1 yard of the main fabric and 1/4 yard of the lining material.
So first you need to draft your pattern. I used a small jumper to get the pattern shapes, and a dress that fits Yuki to get the pattern size. If you need help drafting a pattern, there are plenty of great resources out there like this one or this one.
The pieces you’ll need are:
Bodice front (1 main, 1 lining)
Bodice back (1 main, 1 lining)
Pocket (2 main, 2 lining)
Pocket edge (2 main)
First we’ll do the pockets. Take one main fabric pocket and one lining pocket and pin them together right sides together. Do the same with the other pocket fabrics and sew the curved edge together. Keep the top (straight edge) open! Flip them right side out and press.
Now we’re going to gather the top of the pocket. If you need help with gathering, here’s a great gathering tutorial. I do it the way Dana calls the “proper” way, except I usually only do 1 line instead of 2 or 3, like you’re supposed to.
Sew a straight line across the top edge of the pocket with your machine set to the longest stitch. Do not backstitch at the end or beginning! Pull on one of the threads to gather the top edge of the pocket.
Position your pockets onto the front body piece and top stitch around the pocket. Make sure to leave the top of the pocket open and also sew back and forth several times at each end. The top corners of pockets get pulled the most, so these extra stitches will make sure the pockets are securely attached.
With the side seams opened up, serge or zig zag stitch along the arm hole. Fold the edge down a 1/4 inch, press and sew. If you can’t serge or zig zag, just fold the arm hole edge down a 1/4 inch and then another 1/4 inch, then sew (like you would a hem).
Now we’re going to gather the top part of the body piece. Just like before, set your machine to the longest stitch and sew a straight line across the top of both the front and back of the body piece. Pull one thread to gather the fabric (both front and back). Set the body of the dress aside while we work on the bodice.
Turn about a 1/4 inch of the bottoms in (the same way we did with the pockets) and press.
Now you’re going to slide the gathered edges of the body into the bodice pieces (just like we did with the pockets)! Make sure to put the front of the jumper into the front bodice piece and the back of the jumper into the back bodice. Pin and sew along the straight edge and continue top stitching around the entire bodice piece (both front and back).
I hope this wasn’t too confusing. I’m still learning how to write and photograph for tutorials, so I know this wasn’t perfect, but I’m working on it! In the meantime, don’t hesitate to contact me if you have any questions!
I love the jumper style because it’s so versatile. Depending on the fabric and how you layer it, it can be appropriate for pretty much any season or occasion!
(It is getting harder and harder for me to keep this one still for photos!)
Pair it with a little coat and she’s all ready for the holidays!